Nikon Prostaff 1000i 사용 설명서 - 페이지 20

{카테고리_이름} Nikon Prostaff 1000i에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Nikon Prostaff 1000i 27 페이지.

Measurement

Caution — Controls, adjustments or usage of procedures other than those specified herein may produce

negative effects or damage to your health due to laser radiation.

• Before measuring, be sure to confirm each menu setting. Refer to "Navigating the menus" for menu details

and how to change the settings.

Adjusting the focus of the internal display

If the internal display is difficult to see, adjust the focus with the following

procedure.

1. Press the PWR button to turn on the power.

2. Look through the eyepiece and rotate the diopter adjustment ring until the

internal display comes into focus.

Measuring

1. Press the PWR button to turn on the power.

• If you do not operate the button for about 8

seconds, the power turns off automatically.

Immediately after power-on

3. Press the PWR button to measure.

After measurement, the result is displayed for approx. 8 seconds, then power automatically turns off.

Press the PWR button while the power is on to measure again.

2. Aim at the target.

Position the center of the target mark on the

target.

Diopter adjustment ring

Target mark