Nikon Monarch ATB 10x42 사용 설명서 - 페이지 3
{카테고리_이름} Nikon Monarch ATB 10x42에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Nikon Monarch ATB 10x42 9 페이지. Nikon binoculars product guide
Nikon Monarch ATB 10x42에 대해서도 마찬가지입니다: 제품 설명서 (2 페이지), 사용 설명서 (20 페이지)
Nomenclature
En
Es
1 Eyecups
Fr
2 Neck strap eyelet
Pt
3 Focusing ring
4 Objective lenses
5 Interpupillary distance
English
6 Diopter ring
7 Diopter index
8 0 (zero) diopter position
9 Central shaft
*Waterproof models:
All models shown are waterproof, and will suffer no damage to the optical
system if submerged or dropped in water to a maximum depth of 1 meter
for up to 10 minutes.
These products offer the following advantages:
• Can be used in conditions of high humidity, dust and rain without risk of
damage.
• Nitrogen-filled design makes them resistant to condensation and mold.
Observe the following precautions when using these products:
• As the unit does not have a perfectly sealed structure, it should not be
operated nor held in running water.
• Any moisture should be wiped off before adjusting movable parts
(focusing knob, eyepiece, etc.) of these products to prevent damage and
for safety reasons.
To keep your binoculars in excellent condition, Nikon Vision recommends
regular servicing by an authorized dealer.
4
Please refer to the numbered images on page 2.
ITEMS SUPPLIED
Binoculars ............................ x1
Eyepiece cap ....................... x1
Objective lens caps .......... x2
Soft case ............................... x1
Neckstrap ...............................x1
Eyecups
For directions in which to turn the eyecups, please refer to the image on page 2.
・For eyeglass wearers, use fully retracted. To accurately adjust your view, you can also use two click
stops before reaching the fully retracted position.
・For non-eyeglass wearers, use fully extended. To accurately adjust your eye position, you can also use
two click st
ops before reaching the fully extended position.
Neckstrap and caps during observation
Please refer to images A, B, C and D on page 2.
Attach the neckstrap as illustrated (A), paying special attention to avoid twisting the strap.
Attach the objective lens caps (B), making sure the cap part hinges open downward from the binocular tube
when folded open. The slit should be visible at the left side of each binocular tube, viewed from the eyepiece
side, to confirm correct positioning (correctly attached when supplied).
Eyepiece cap during observation
There are two ways you can position the eyepiece cap as you observe your subject.
1. Remove the eyepiece cap from the eyepieces and allow it to hang from the neckstrap.
2. Remove the eyepiece cap from the eyepieces, then detach the right strap from the cap and allow it to
hang from the left neckstrap (C).
Objective lens caps during observation
The binoculars are used with the objective lens caps folded open (C).
Attaching and detaching the eyepiece cap from the neckstrap
Attach/detach caps from the neckstrap as shown in image (D) in the following order:
Attaching: c → b → a
Detaching: a → b → c
En
Es
Fr
Pt
5