Dirt Devil CV2200 사용 설명서 - 페이지 6

{카테고리_이름} Dirt Devil CV2200에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dirt Devil CV2200 11 페이지. Central vacuums, filtered cyclonic, disposable bag
Dirt Devil CV2200에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지), 사용 설명서 (16 페이지)

Dirt Devil CV2200 사용 설명서
®
Dirt Devil

OPERATING INSTRUCTIONS

General Information

Do Not Store Objects on top of the
power unit. This will block the motor
cooling ventilation. Restricting the
cooling airflow may shorten the
motor life.
The central vacuum is designed to
vacuum ordinary household dirt and
dust. The system is designed for dry
pickup. A Wetvac accessory is needed
if the system will be used for liquid
pickup.
The central vacuum system is a
network of inlet valves, 2" PVC
tubing, and low voltage wiring
installed in the walls of your home.
To operate the system, simply plug
the hose into an inlet valve, attach
the cleaning tool to the curved hose
end and begin vacuuming. The dirt
is transported through the in-wall
tube system back to the dirt canister
(located on the power unit).
Caution:
Do not allow the motor to
remain turned on, unless a hose is
connected or an inlet valve is open. If air
is not permitted to pass through the fan
blades, damage may occur to the motor.
Built - In Central Vacuum Systems
Operating Instructions
Using the Central Vacuum System is
easy. Simply raise the inlet valve lid,
insert the hose end and attach the
desired cleaning tool to the
hose wand. The Power Unit is activated
when the hose is inserted into the
valve.
Emptying the Dirt
Canister & Replacing
The Filter Cartridge
The dirt canister – where the
vacuumed dirt is deposited – is the
removable lower portion of the
power unit. The canister needs to
be removed and emptied when it is
1/2 - 2/3 full. The filter cartridge
should be replaced once a year.
When the dirt canister is removed
the Cyclonic Cone will be visible.
The cone is designed to stay
attached to the body of the power
unit when the dirt canister is
removed. The cone is removable to
allow access to the replaceable
pleated filter. To replace the cone,
follow the steps listed under
replacing the filter.