Dirt Devil DDBC1400 사용자 설명서 - 페이지 7

{카테고리_이름} Dirt Devil DDBC1400에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dirt Devil DDBC1400 12 페이지. Bagged cylinder

---

Maintenance

6) Place dust bag frame inside dust bag compartment placing

dust bag frame into the guides at the very front of the dust bag

compartment.

7) Swing bag cover lid closed and push to latch.

Regulating the suction power

You can set the suction power on the device individually as you require it using the suction regulator.

We recommend using minimum suction power for delicate materials. Select medium suction power

for mattresses, upholstered furniture and carpets. Select maximum suction power for tiled, wood and

other robust floors.

Cleaning the exhaust air filter or HEPA filter

The exhaust air filter or HEPA filter cleans the air a final time before it leaves the vacuum cleaner.

You can clean the exhaust air filter or HEPA filter as follows:

1) Switch off the vacuum cleaner and disconnect the plug from the mains. To do this always pull

on the plug and not on the cable.

2) Open the exhaust air grill.

3) The exhaust air filter or HEPA filter is visible when the grill has been opened.

4) Rinse the filter or HEPA filter under cold running water and allow to dry. (Suggest up to 24 hrs to

allow the filter to completely dry before replacing it back into the unit).

5) Put the exhaust air filter or HEPA filter back into place (or replace with a new one)

6) Close the exhaust air filter grill.

AU: 1300 361 505 / NZ: 0800 800 900

Dirt Devil Service line