Dirt Devil DDRC3 사용자 설명서 - 페이지 7

{카테고리_이름} Dirt Devil DDRC3에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dirt Devil DDRC3 13 페이지. Bagless cylinder

MAINTENANCE

IMPORTANT:

If the air inlet, hose or telescopic tube is blocked, switch off the vacuum cleaner and

remove the blockage(s) before re-starting the vacuum cleaner.

IMPORTANT:

The motor is equipped with a thermal cut-out. If for any reason the unit should overheat,

the thermostat will automatically turn the unit off. Should this occur, unplug the vacuum cleaner from

the electrical socket and turn off the switch. Remove and empty the dirt container. Check the hose for blockages.

Clean the filters. Allow the unit to cool for approximately one hour (if you have cleaned the filters you will

need to wait twenty four hours for the filters to dry before putting them back in the machine). To re-start the

machine, plug it into an electrical socket and switch it back on.

Emptying and cleaning the dirt container

Remove dirt container by pushing

down the dirt container release

button and lifting the dirt container.

dirtdevil.com.au

Hold the dirt container over a bin and press the dirt release latch

(located at the rear of the dirt container).