Dirt Devil LET'S GO. DDW02-R01 사용자 설명서 - 페이지 13

{카테고리_이름} Dirt Devil LET'S GO. DDW02-R01에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dirt Devil LET'S GO. DDW02-R01 20 페이지.

iMPOrTanT

If you hear a noticeable change in the pitch of

the cleaner. This indicates a need to empty the

dirty water tank.

USE THE WASH TOOl

1. Grasp the top of the

dirty water tank handle and

press the release latch.

4. To empty the water tank

grasp the handle with one

hand and the nozzle with

the other and empty into

the sink.

CaUTiOn

Don't over saturate your upholstery.

(SOME MODELS ONLY)

1. Turn power switch on and brush

switch off. While depressing the solution

spray trigger, push attachment in

forward motion. Release trigger and pull

attachment backwards over the same

path to remove dirty water and solution

from upholstery. (For heavily soiled

areas, repeat if necessary).

2. Pull the dirty water tank

up out of the base, taking

care to ensure that no dirty

water leaks from the front.

IMPORTANT: Empty and rinse out clean and dirty water tank and leave to air

dry before replacing. Do not leave solution stored in tank between uses.

IMPORTANT: The ﬂ oat in your carpet washer will shut off suction when the

dirty tank is full. For best results, use a smooth steady motion, keeping the

nozzle ﬂ at against the carpet. Once the ﬂ oat is activated, empty the dirty

water tank. If the tank does not appear full, turn off the power switch and

wait for the ﬂ oat to settle.

3. Remove dirty water

tank lid.