Cub Cadet 188 운영자 매뉴얼 - 페이지 12

{카테고리_이름} Cub Cadet 188에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cub Cadet 188 16 페이지. 19-inch 3-n-1 rechargeable lawn mower
Cub Cadet 188에 대해서도 마찬가지입니다: 운영자 매뉴얼 (18 페이지)

페이지 인쇄

Trouble

Shooting

NOTE: For repairs beyond

the minor adjustments listed

here, contact an authorized

service dealer.

NOTE: Specifications are

subject to change without

notification or obligation.

Images my not reflect your

exact model and are for

reference purposes only.

Problem

Motor fails to start

Mower stops while mowing

Excessive vibration

Mower will not mulch grass

Uneven cut

Cause

1. Key not in switch.

2. Motor/blade control disengaged.

3. Battery discharged.

4. Mower deck clogged with grass and debris.

1. Discharged battery.

2. Cutting too much grass.

3. Clogged deck.

4. Overload protection switch is tripped.

1. Cutting blade loose or unbalanced.

2. Bent cutting blade.

3. Bent motor shaft.

1. Mower deck clogged.

2. Wet grass.

3. Excessively high grass.

4. Dull blade.

1. Wheels not positioned correctly. (Individual

height adjusted units only)

2. Dull blade.

Remedy

1. Insert Ignition key.

2. Depress starter button, and engage

motor blade control.

3. Charge battery.

4. Unclog mower deck. Make certain

blade is free to move.

1. Charge battery.

2. Raise cutting height.

3. Unclog mower deck. Raise cutting

height, or cut a narrower swath.

4. Reset the overload protection switch

following the instructions in the

Maintaining Your Lawn Mower section

of this manual.

1. Tighten blade and adapter. Balance

blade.

2. Replace blade.

3. Contact nearest authorized service

center.

1. Unclog mower deck. Make certain

blade is free to move.

2. Do not mow when grass is wet; wait

until later to cut.

3. Mow once at a high cutting height,

then mow again at desired height or

make a narrower cutting swath (1/2

width).

4. Sharpen or replace blade.

1. Place all four wheels in same height

position.

2. Sharpen or replace blade.