Dirt Devil Vacuum Cleaner 소유자 매뉴얼 - 페이지 9
{카테고리_이름} Dirt Devil Vacuum Cleaner에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dirt Devil Vacuum Cleaner 10 페이지. Vacuum cleaner dirt devil
Dirt Devil Vacuum Cleaner에 대해서도 마찬가지입니다: 소유자 매뉴얼 (8 페이지), 소유자 매뉴얼 (8 페이지), 소유자 매뉴얼 (18 페이지), 소유자 매뉴얼 (18 페이지), 소유자 매뉴얼 (18 페이지), 소유자 매뉴얼 (18 페이지), 소유자 매뉴얼 (14 페이지)
페이지 인쇄
Toremove the
belt,hookthe belt
onthe left sideof the motor shaft,
turn clockwise and pull the belt
towardsyouto release.
4f /
\_
Removescrewson bottomof
metalnozzleguardas shown.
Removemetalnozzle guard and pul]
brushroll a nd belt straight out from
unit.
With the new belt properly located in
the channel on the middle of the
brushroll, slide the brushrol! straight
downintothe uniLNOTE:Make sure
the bmshre// e nd capsalign with the
tabsinsidethe brushre// housing (see
inset).Brushro// is notsymmetrical,its
orientationisimportant.
4
Attachthe metalnozzleguard,
ensuring that tab is engaged
before securing with the
screws.
Dipthe belt lifter insidethe belt
access area and hook the belt
aroundthe lip of the belt lifter.
Slip the belt ontothe motorshaft
until the belt lifter basemeetsthe
shaft. To ensure proper belt
placement, gently turn belt lifter
counterclockwise and remove.
Makesurebelt isonshah
Belt should look like the
illustration above.
IMPORTANT: THE BELTWILL
COMEOFFIF NOTPROPERLY
INSTALLED,
Attachbelt doorto unit and
securewithscrew.