Armstrong 320 설치 및 유지 관리 매뉴얼 - 페이지 10

{카테고리_이름} Armstrong 320에 대한 설치 및 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Armstrong 320 20 페이지. Water temperature controls groups of fixtures - thermostatic
Armstrong 320에 대해서도 마찬가지입니다: 설치 및 유지 관리 매뉴얼 (20 페이지)

페이지 인쇄

Step 1

a. Unscrew the set screw.

b. Remove the Backplate.

Step 3

a. Important! Prior to assembly of the hot and cold

adapters, look inside each one and ensure that there

is a strainer and a white plastic checkvalve. The

adapter with nothing inside is for the outlet.

Thread the coupling nuts onto the Valve assembly

then tighten using an adjustable spanner.

Caution! Use a soft cloth to protect the plating

from damage while tightening the spanner.

Step 2

Ø 6 mm

2.5 mm

a. Use the Backplate to mark the four mounting holes at

the desired height.

b. Drill the holes (6 mm) and fit the wall anchors. Screw

the Backplate to the wall.

Caution! Avoid area where underground wirings

or pipelines pass through.

Step 4

a. Mount the Valve assembly on the Backplate fixed on

the wall. Make sure the Valve assembly locks in the

groove.

b. Tighten the set screw.

6.0 mm

2.5 mm