Classen SCHV-18/5.5 운영자 매뉴얼 - 페이지 7

{카테고리_이름} Classen SCHV-18/5.5에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Classen SCHV-18/5.5 20 페이지. Hydro-drive sod cutter

To prevent injury, wear appropriate eye protection and

stand clear when cutting banding. Banding is under ten-

sion and may snap back when cut.

1. Remove crate top, sides and plastic covering unit.

Remove the banding attaching the Sodcutter to

the pallet.

2. Roll the Sodcutter off the pallet. The unit can also

be driven off the pallet, but first read the Safety,

Controls, and Operation sections of this manual,

then check the oil and add gas.

3. Dispose of pallet, crate, plastic and banding in a

responsible manner.

Moving blades/blade

arms

cut/crush Hazard

Stay clear of blade/

blade arms while

operating.

Stop engine before

servicing

or adjusting.

ROTATING PARTS:

Entanglement / Amputation Hazard

Do not operate with cover removed.

Stop engine before servicing.

ATTENTION:

• Read Operator Manual

before servicing or repairing.

• Remove spark plug wire

before servicing or repairing.

LABELS

SET-UP