Dirty hand 100481 운영 매뉴얼 - 페이지 12

{카테고리_이름} Dirty hand 100481에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dirty hand 100481 16 페이지. 5-ton electric log splitter

Operating Instructions

IMPORTANT: Before operating the log splitter turn the bleed

screw as shown below one or two turns to allow air to be released

from the hydraulic system. A flow of air through the bleed screw

should be detectable while the log splitter is in use. Close the bleed

screw after operation. Make sure that the bleed screw is closed

before and during moving. Hydraulic fluid may leak through the

bleed screw opening if the bleed screw is not fully tightened.

Failure to loosen the bleed screw will cause pressure to build up

in the hydraulic tank and could damage the seals and affect the

operation of the log splitter.

Bleed Screw

Fluid Drain/Dipstick