Dirty Hand Tools 104001 운영 매뉴얼 - 페이지 7

{카테고리_이름} Dirty Hand Tools 104001에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dirty Hand Tools 104001 20 페이지. Vibratory plate compactor

Unpacking and Assembly

Your plate compactor will require some assembly. The following

instructions will help you unpack and assemble your plate compactor,

and adjust the tensioning on the v-belts.

Unpacking

Open top of carton and remove the plate compactor components.

Plate Compactor Components:

Plate Compactor chassis with engine assembly

Handlebar assembly

Folding wheel kit

Paving pad kit (Model 104001)

Air Filter, Air Filter Cover and Retaining Knob (Model 104950)

Hardware bag

Operation Manual

The engine is shipped from the factory without oil.

You must add engine oil before starting the engine.

Place the air filter in the air filter housing, with the ribbed side facing

the inside of the cover. Align the two tabs at the top of the air filter

cover with the two slots at the top of the housing and close. Insert the

retaining knob into the hole at the bottom of the cover and thread

into the housing until the cover is secured tightly.

AIR FILTER

HOUSING

CAUTION

DO NOT ATTEMPT TO START ENGINE

BEFORE ADDING OIL TO ENGINE

Use only 10/30W oil for a 4-cycle engine.

AIR FILTER

COVER

RETAINING

KNOB