Classic Duo 500 설치 및 운영자 매뉴얼 - 페이지 12

{카테고리_이름} Classic Duo 500에 대한 설치 및 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Classic Duo 500 20 페이지.

5.3

Switch the machine on :

The machine will now automatically fill and heat, during this process the door

should remain closed, allowing the process to be completed quickly.

5.4

Machine ready to operate :

Depending how your appliance has been commissioned, it may be possible to

start a cycle prior to the 'Machine ready' / 'Water hot' lamp being illuminated,

'Classic' would recommend that you wait for the lamp to be illuminated before

requesting a cycle to commence.

Note !

On the 'DUO' range of appliances, the 'Machine Ready' lamp indicates when the

machine initial reaches its desired temperatures, thereafter the lamp changes

function to a 'Cycle in progress' lamp and will illuminate when a cycle is

requested and during the cycle itself.

5.5

Starting a cycle :

Close the door, then depress the 'Cycle' switch, your appliance will now auto

matically progress though the cycle, during which time the 'Cycle in progress'

lamp will be illuminated.

5.6

Draining :

During normal operation your appliance will automatically drain away any

excess water.

'Classic' recommends if your appliance is not being used for a prolonged period

of time the machine must be completely drained down

Page 10

Ensure that both the water and electrical supply are

connected and switched on, then depress the 'ON/OFF'

switch located on the fascia of the machine.

To start a cycle, open the door, load the first basket, ensuring that

bottom and top wash arms will rotate freely, on Eco1, Eco2 and Duo2

appliances there are no top rotating wash arms.

At the end of the cycle open the door and remove the basket, then

reload the machine and repeat as required