ABBA SPB07 설치 매뉴얼 - 페이지 3

{카테고리_이름} ABBA SPB07에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ABBA SPB07 4 페이지.

페이지 인쇄

CAUTION:

fixture(s) must be installed in accordance with all local codes and ordinances.

Do not instal within 10 feet of a pool, spa or fountain

INSTALLATION INSTRUCTION

To ensure optimal performance and safety, it is important to

use our fixtures ONLY with a low voltage landscape

transformer. This transformer reduces the voltage from

120V to 12V, making it safe and suitable for outdoor use.

When

installing

the

fixture(s),

please

these

instructions carefully:

1. Before installation, please ensure that the power is turned

off for your safety.

2.To establish a dependable and enduring electrical

connection between fixture wires and the main line in

outdoor or underground installations, it is essential to select

a suitable main cable connector designed for direct burial.

This connector should be chosen based on its ability to

withstand environmental conditions, resist moisture and

corrosion, and provide robust insulation. By adhering to

industry standards and best practices, including proper wire

stripping and secure fastening techniques, a reliable

connection

can

established,

ensuring

optimal

performance, safety, and longevity of the system.

We recommend using WN12 waterproof wire nuts (sold

separately) for optimal connectivity.

3. Attach the fixture(s) wires to the main cable connector

suitable for direct burial and use waterproof wire nuts.

WN12 (Sold separately).

4. For a secure and stable mounting, dig a small hole and

insert the spike into the ground, ensuring it is vertical and

firm.

5. Remove the lens from the fixture.

6. Insert the bulb with the correct wattage.

CAUTION: Do not exceed maximum

wattage on the fixture.

7. Place the lens back onto the fixture.

8. Adjust the light angle.

9. Turn on the power.

We strongly recommend that the main cable from the transformer be buried

underground for safety reasons. Additionally, please be sure to avoid

exceeding the maximum wattage on the fixture(s) to prevent any damage or

hazards.