Blackweb BWA15AV107 제품 설명서 - 페이지 3

{카테고리_이름} Blackweb BWA15AV107에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Blackweb BWA15AV107 4 페이지. 2 pack indoor/outdoor bluetooth speaker

페이지 인쇄

POWER & CHARGING

DC Power Input

Requires an AC/DC power adapter (included).

Each speaker must be charged independently.

Battery life when not in use is roughly 6 months. The battery

must then be fully recharged. Charge each speaker for at

least 2.5 hours before use.

1. Connect one end of the included AC/DC power

adaptor to the unit and one end to an AC power outlet

to recharge the battery.

WIRELESS CONNECTIONS

Pairing the Speakers

This process should be done FIRST before pairing to a

Bluetooth device. This should only need to be done upon

beginning the pairing process.

1. Power on the speakers by sliding the power switch to

the ON position on both units.

2. The Bluetooth Indicator and Speaker Connection

Indicator

both speakers your speakers are already paired. You can

skip to the Pairing a Bluetooth Device section.

3. Press the Connect Speakers button on both speakers

simultaneously.

5. Wait until both Speaker Connection Indicators are

solid white. This indicates that the speakers have

successfully paired. Please note that this process can take

up to 1 minute.

For all future uses please turn on both speakers and wait for

them to connect. Note that it may take up to 1 minute for

them to pair automatically even after initial use, but here

should be no need to press Connect Speaker button again.

If any pairing issues should occur, repeat the above steps.

Pairing to a Bluetooth Device

Pairing the Speakers. When pairing, the device should

remain within 3 feet of the speakers.

If the Speaker

If your device should become unpaired for any reason,

repeat the above steps.

If any pairing issues should occur, un-pair the unit on your

Bluetooth device and repeat the above steps.

Note : If two speakers with the BWA15AV107 name appear

on the pairing list of your device, please erase one of

BWA15AV107 listed in your Bluetooth device and repeat the

above steps.

Playing Audio Wirelessly

Follow the instructions for Pairing a Bluetooth Device.

ON/OFF

DC IN 5V

1. Press the Pair button on ONLY ONE of the speakers.

2. Using the native controls on your Bluetooth device,

select BWA15AV107 in your Bluetooth settings to pair.

If your device requests a password, enter the default

password 0 0 0 0 .

instructions on pairing and connecting Bluetooth devices.

3. When successfully paired, the pairing indicator will

4. After initial pairing, the unit will stay paired unless

unpaired manually by the user or erased due to a reset

of the device.

1. Use the native controls on the connected Bluetooth

Device to select and play, pause or skip media.

2. Any audio played through the connected Bluetooth

device will now be heard through the speakers.