ABBA STS600 설치 매뉴얼 - 페이지 10

{카테고리_이름} ABBA STS600에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ABBA STS600 11 페이지.

Astronomic

timer: The device offers an astronomical mode that aligns with your local

sunrise and sunset times. It is specifically designed for indoor use in areas with inadequate

natural lighting. Please ensure that you have selected your location from the provided city

code sheet by referring to the "location" icon.

To set the astronomic auto ON and OFF mode, follow these steps:

Press the up and down buttons simultaneously to select the astro icon.

Press the enter button to confirm the selection. The astro icon and ".00" icon will start

blinking.

Press the enter button once more to activate the half sunrise button, which will also

shine.

Press the enter button to complete the astronomic auto ON and OFF mode setting.

Please note that this mode is the default mode for the astronomic feature.

Optional setings

To configure the optional ON time setting, follow these instructions:

When you observe the astro icon and ".00" blinking, utilize the up and down buttons to

adjust the start ON time.

You can set the start ON time to be 10-15 minutes advanced or delayed from the

actual sunset time.

Press the enter button to confirm your selected ON time.

Optional Specific OFF time setting

To set a specific end OFF time, follow these steps:

When you notice the clock AM/PM icon and half sunrise icon blinking, it indicates that

the device is ready for the end OFF time configuration.

Utilize the up and down buttons to select the desired specific time.

Press the enter button to confirm the selected end OFF time.

Always remember to press the enter button after selecting the desired hours and

minutes.

The LCD display will show the loading consumption rate, and you will notice a blinking

overload warning icon.

The device incorporates built-in protection against overloads and short circuits. To

activate and reset this protection, simply press the MODE button.

2 x 300W independent mode setting zones;

2x COM/ 12V or 15V output x3 lines

Tooless quick connectors/taps