Disaster Area Designs DMC.micro 사용자 설명서 - 페이지 12

{카테고리_이름} Disaster Area Designs DMC.micro에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Disaster Area Designs DMC.micro 12 페이지.

페이지 인쇄

MultiJack Configuration

The 1/4" jack on the DMC.micro is our astounding MultiJack! It can handle all kinds of connectivity and functionality, so let's get the

details!

Enter the Setup menu and navigate to the JACK sub-menu.

EXP:

The MultiJack will connect to an external expression pedal. This will let you use one expression pedal to send MIDI

expression commands to one or more of your MIDI devices. The DMC knows what commands to send, based on its

device drivers. The DIP switches should be set to ON-ON-ON.

FT.SW: The MultiJack will connect to an external foot switch. This lets you use a standard tap tempo type momentary foot switch to

send MIDI taps to your pedals. The DMC knows which commands your pedals need, based on its device drivers. The DIP

switches should be set to ON-ON-ON.

RLY:

The MultiJack will use its internal relay to send tap tempo commands to a single non-MIDI device that is tap capable.

IMPORTANT: Set the DMC.micro internal DIP switches to OFF-OFF-OFF in order to use this option. You should also enable

UTIL mode and set at least one switch message type to TAP to use this function.

MIDI:

The MultiJack will send MIDI on the jack tip. This works with Empress, Meris, and Alexander pedals using a standard mono

patch cable. This function will also work on Chase Bliss Audio pedals by using the MJ-CBA cable. Set the DIP switches to

ON-ON-ON.

MID2:

The MultiJack will send MIDI on both the jack tip and the jack ring. This works with a Chase Bliss audio pedal and a standard

TRS / stereo cable if the MultiJack DIP switches are set to ON-ON-OFF from left to right.

This option will also allow you to connect two MIDI devices to the MultiJack using an MJ-Y, MJ-Y-RP1, or MJ-Y-RP2 cable. Set

the DIP switches to ON-ON-ON to use the MultiJack with two MIDI devices.

UTIL:

The MultiJack will connect to an expression pedal and will send a MIDI CC message of your choosing. Set the DIP switches

to ON-ON-ON and consult the following section for details on conﬁguring the desired MIDI message.

The next sub-menu is the Jack Utility Assignment. Set J UT to the MIDI CC message you would like to send, the range is 0 to 127.

The ﬁnal menu in the MultiJack conﬁguration is the MultiJack Channel Assignment. Set J CH to the channel or channels you would like

to use. For example, if you would like to use the MultiJack to connect to an expression pedal that controls your A and C devices, then

set J CH = JA0B. If instead you would like to send tap tempo to your A and B devices but not your C device, then try setting J CH =

AB0.

USB HOST and USB MIDI

The DMC.micro USB port is capable of interfacing with a variety of devices. One of the most popular applications for the USB port is to

control the Zoom MultiStomp series (MS-50G, MS-60B, MS-70CDR.)

Enter the DMC setup menu and conﬁgure USB = HOST, then set up DEVA = ZOOM.

Make sure that DEV is set to at least DEVA to enable the Device A page.

Power the DMC.micro off, then connect the gHOST Adaptor to its USB port.

Connect the Zoom USB cable to the Zoom's USB port, then connect the USB cable and the gHOST Adaptor.

The Zoom pedal should change presets in response to the DMC.micro.

The DMC.micro can power the Zoom pedals but please be aware that you'll need to use an output on your power supply

capable of supplying more than 100mA! You may also power the DMC.micro and Zoom pedal separately from two standard

power supply ports.

If you would like to use the DMC.micro as an interface to your computer or iPad, set USB = MIDI in the DMC setup menu. Restart the

controller and connect it to your device. You should see a MIDI interface called "Disaster MIDI" in your application's list of available

devices. The DMC.micro is class-compliant and should not require drivers on any modern operating system.

The DMC.micro will pass any MIDI information it receives over USB out to its 5-pin MIDI and MutliJack ports.

Disaster Area Designs

DMC.micro

Gen3