Blackzon Slayer 사용 설명서 - 페이지 4
{카테고리_이름} Blackzon Slayer에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Blackzon Slayer 20 페이지. 1/16th scale 4wd electric power race truck
Blackzon Slayer에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지)
페이지 인쇄
1) Switch on the Transmitter:
Slide the Power Switch to "ON" position.
Make sure the transmitter is of enough battery power. Please replace
with the new batteries for transmitter if the LED on transmitter blinks
slowly.
2) Switch on the ESC/Receiver:
Press and hold the ESC/Receiver Power Switch for
2-3 seconds to turn on the car. It will be for a few seconds
before LEDs (on Transmitter and the ESC/Receiver)
stop blinking and become solid on, which indicates that
the car is bound with the transmitter.
Binding operation may fail in low battery power.
Please stop and charge the battery pack once the car
jerks, jogs or moves so slowly. Under the circumstance
of flat battery power, the car may have steering but not
the throttling. In case the car runs harshly noisily, stop
to check if there is something clogged in the drive train.
3) Checking the Steering Performance by turning the Steering Wheel:
A) With the steering wheel centered, the vehicle runs in a straight line.
Slight adjustment by flipping the steering wheel is occasionally needed. It largely depends
on the terrains that you drive.
B) Turn the steering wheel to the left, and the car turns left.
C) Turn the steering wheel to the right, and the car turns right.
4) Throttle Control:
PUSH IT
FORWARD
PULL IT
CENTRE
BACK
Starting Running
FORWARD
Pull the trigger to accelerate , release it to slow the speed,
and push to brake. Pull it to the Centre Position and push it
again to go reverse.
3
STOP
REVERSE