Disc Makers ElitePro2 사용 설명서 - 페이지 13

{카테고리_이름} Disc Makers ElitePro2에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Disc Makers ElitePro2 20 페이지. Elitepro series cd-r/dvd-r publishing and printing system

페이지 인쇄

Step 7

Start the Duplication Process

You are now ready to begin a CD-R or DVD-R (if your ElitePro is a DVD-R ver-

sion) duplication job or task on the ElitePro. The next steps will take you

through a typical setup and usage of the ElitePro. We recommend that you fol-

low these steps and produce a test job, then move on to the many other func-

tions and features of the ElitePro.

• Load blank inkjet printable CD-Rs or DVD-Rs onto the input spindle. The

input spindle has three silver rods located around the outside edge of the

discs. Make sure the media lays flat in the input spindle and they do not stick

together.

• Place a CD or DVD-R to be copied on the top of the input spindle. This will be

the "master" for this test run. We recommend that you use a CD with an

image of 30MB or less to allow for a faster test run.

• On the desktop, click on the Elite/DiscJuggler icon. The DiscJuggler pro-

gram will open.

• Click on File / New and the panel pictured below will open.

• Choose Copy CDs and DVDs from the same burner. This task will take the

CD on the top of the input stack, load a temp image to the hard drive, and

copy from the temp image.

Screen of Start of a New Job

www.discmakers.com

1-888-800-4041