Disc Makers ReflexPro4 사용자 설명서 - 페이지 9

{카테고리_이름} Disc Makers ReflexPro4에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Disc Makers ReflexPro4 15 페이지. Cd-r disc duplicator reflexpro series
Disc Makers ReflexPro4에 대해서도 마찬가지입니다: 사용 설명서 (13 페이지), 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

load the recorder drives with high quality blank CD-R media. Press the 'ENT'

button to start the process, the unit will analyze the master on the (Src)

drive, and then any disc in the recorder drives.The LCD will display number of

discs that passed the test and then go directly to doing the copy. Upon doing

a successful test and copy the following will display on the LCD.

3. Test and Copy

OK: 02

In this example two discs were successfully tested and copied.

If the target CD-R has already been written to, or is damaged and cannot be

written to, the drive for this disc will not open. Likewise, if the data on the

master CD will not fit on the blank target CD the drive will remain closed.

4. V

ERIFY

The verify function is used to confirm that the master and the copy read the

same. Again this function operates similarly in both the hard drive to disc and

the disc to disc mode

1. Select the function using the up and down arrows.

2. In the hard drive to disc mode: load the drives with the copied discs. The unit

will analyze the master on the hard drive, and then compare that to any disc

loaded in the recorder drives. The LCD will display the number of discs that

verified correctly and the number that failed the verification. Those that veri-

fied correctly will be ejected from the recorders. All failures will remain in the

drives.

3. In the disc to disc mode: Load the top drive (Src) with the master disc and

load the recorder drives with the previously written media. Press the 'ENT'

button to start the process, the unit will analyze the master in the (Src)

drive, and then any disc in the recorder drives.The LCD will display the num-

ber of discs that verified and the number that failed. Those that verified cor-

rectly will be ejected from the recorders. All failures will remain in the drives.

1-800-237-6666

In this example, three discs verified correctly and one disc failed the verifica-

tion.

The "F->" indicates that by pressing the 'ENT' button the failed disc(s) will be

ejected from the recorders. Please be careful to remove the correctly verified

disc(s) before pressing 'ENT again.

To verify more duplicated discs simply fill the recorders and press 'ENT,

again.

5. C

OMPARE

The compare function takes the verify function one step farther, it gives details

about the master and copied disc. It also, ejects the disc upon a successful

comparison.

1. Select the function using the up and down arrows.

2. In the hard drive to disc mode: load the drives with the copied discs. The unit

will analyze the master on the hard drive, and then compare that to any disc

loaded in the recorder drives. The LCD will display the number of discs that

compared correctly and the number that failed. Those that passed the com-

parison will be ejected from the recorders. All failures will remain in the

drives.

3. In the disc to disc mode: Load the top drive (Src) with the master disc and

load the recorder drives with the previously written media. Press the 'ENT'

button to start the process, the unit will analyze the master on the (Src)

drive, and then any disc in the recorder drives. The LCD will display the num-

ber of discs that compared correctly and the number that failed. Those that

passed the comparison will be ejected from the recorders. All failures will

remain in the drives.

www.discmakers.com

4. Verify

F->

OK: 03

Fail: 01