Cub Cadet 190-341-100 운영자 매뉴얼 - 페이지 6

{카테고리_이름} Cub Cadet 190-341-100에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cub Cadet 190-341-100 20 페이지. 42" snow thrower attachment for cub cadet series 2000/2500 tractors
Cub Cadet 190-341-100에 대해서도 마찬가지입니다: 설치 및 유지보수 지침 매뉴얼 (20 페이지)

페이지 인쇄

Contents of Carton

Select a firm level surface that is large enough to accommodate both the snow thrower assembly and the tractor. Remove the upper

crating material, and remove the hardware pack from the shipping crate. Carefully roll the snow thrower assembly rearward so that

it rests on its bottom; then carefully "walk" the snow thrower off the shipping pallet. When repositioning the snow thrower, use care

not to pinch or bind the chute crank support tube and/or lift handle (B and C, Figure 1). Cut the tie strap and remove the packaging

material from the chute crank support tube assembly (B) and position to the left side of the snow thrower assembly. Cut the tie strap

and remove the packaging material from the lift handle assembly (C) and position to the right side of the snow thrower.

Refer to Figures 3-1 and 3-2 to confirm that all parts are present and to acquaint yourself with the part descriptions. Throughout this

manual's instructions, the parts shown in Figures 3-1 and 3-2 will be identified by name, followed by either their callout letter or part

number in parenthesis to aid in assembly and installation.

NOTE: Because different PTO clutch assemblies are used on the various Series 2000 tractor models, two PTO drive belts are provided

with the 341 Snow Thrower. If your tractor has a single cylinder engine, use the 754-0441 (shorter) V-belt. If your tractor has a twin

cylinder engine, use the 754-3075 (longer) V-belt.

REF.

PART #

N/A

754-0441

754-3075

Figure 3-1

DESCRIPTION

Snow Thrower / Discharge Chute Assembly

Chute Crank / Tilt and Support Assembly

Lift Handle / Latch Release Cable Assembly

PTO Belt, Type A; 76.1 Lg- For Single Cylinder Engines

PTO Belt, Type B; 78.3 Lg - For Twin Cylinder Engines

QUANTITY