Cub Cadet 317-262-100 소유자 매뉴얼 - 페이지 4
{카테고리_이름} Cub Cadet 317-262-100에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cub Cadet 317-262-100 20 페이지.
페이지 인쇄
161 22
I sroP
I
23.
24.
25.
z o .
2 7 .
MAINTE.
NANCE &
STORAGE
SAFETY
DECALS
D0 ]l0T
USE HAi{DS
T0 uilcLoc
DISCHARGE
CHUTE.
This safety decal is located on
the auger housing. lt is very im-
portant that you follow its in-
structions. Also replace it, if
damaged.
2 1 . When cleaning, repairing, or inspecting, make certain collector/impeller
and all moving parts have
stopped. Disconnect spark plug wire and keep away from plug to prevent accidental starting.
Do not run engine indoors, except when starting engine and transporting snow thrower in or
out of building. Open doors. Exhaust fumes are dangerous.
Do not clear snow across the face of slopes. Exercise extreme caution when changing direc-
tion on slopes. Do not attempt to clear steep slopes
Never operate snow thrower without guards, plates, or other safety protectton devices in place
Never operate snow thrower near glass enclosure, automobiles, window wells, drop off, etc .
without proper ad.justments of snow thrower discharge angle. Keep children and pets away
Do not overload machine capacity by attempting to clear snow at too fast a rate.
Never operate the machine at high transport speeds on slippery surfaces. Look behind and
use care when backing.
28. Never direct discharge at bystanders or allow anyone in front of unit.
29. Disengage power to collector/impeller
when transporting or not in use'
30. Use only attachments and accessories approved by the manufacturer of snow thrower (such
as wheel weights, counter weights, cabs, etc.).
31. Never operate the snow thrower without good visibility or light. Always be sure of your footing
and keeo a firm hold on the handles. walk, never run with the snow thrower.
32. Muffler and engine become hot and can cause a burn. Do not touch'
33. Check shear bolts, engine mounting bolts, etc., at frequent intervals for proper tightness to be
sure equipment is in safe working condition.
34. Never store the machine with fuel in the luel tank inside a building where ignition
sources are present, such as hot water and space heaters, clothes dryers, and
the like. Allow engine to cool before storing in any enclosure.
35. Always refer to owner's guide instructions for important details if snow thrower is
to be stored for an extended period.
36. Run machine a few minutes after throwing snow to prevent freeze up of collector/impeller.
37. Check clutch controls periodically to verify they engage and disengage properly and readjust
if necessary. Refer to owner's guide for adjustment instructions.
The safety decals are located near any area of potential danger and are easily visible to the opera-
tor. These are meant to warn the operator of the danger. lt is very important to follow the instruction
on these decals to maintain safety.
This safety decal is located
on the discharge chute.lt is
very imponant that you follow
its instructions. Also replace
i t . i f d a m a q e d .
AI|()ID
IIIJURY
FR(IM
ROTATIIIG
AUGER.
I(EEP
HAI{I)S,
TEET,
AI{O CLOTHI]IG
ATYAY!