DISCO DAC351 데이터 유지 관리 매뉴얼 - 페이지 3
{카테고리_이름} DISCO DAC351에 대한 데이터 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DISCO DAC351 20 페이지. Automatic dicing/cutting saws
페이지 인쇄
- 1. Read Carefully before Using this Manual
- 2. Introduction
- 2. Table of Contents
- 3. Contents
- 4. C. General Description of Data Screen
- 5. Important Safety Information
- 5. General Safety Precautions
- 5. Safety Precautions to be Observed During Operation
- 5. Inherently Hazardous Areas and Ways to Avoid Hazards
- 5. EMO Switch
- 5. Operations
Hazard level
The safety precautions set forth in this document are classified into DANGER,
WARNING and CAUTION categories which represent three degree of hazards
latent in the machine. These categories are defined as detailed below in
accordance with the seriousness and probability level of the hazard. In addition
to the above three safety precaution levels, NOTICE is used to give safety
usage instructions to the user.
Before using the machine, be sure to read and understand all the associated
safety precautions set forth in the manual.
Hazard levels are classified as follows:
DANGER
WARNING
CAUTION
CAUTION
NOTICE
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious
injury.
This symbol is used for the incident in which the
damage is serious and there is high probability of
occurrence.
WARNING indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
This symbol is used for the incident in which the
damage is serious but there is not high probability of
occurrence.
CAUTION indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
This symbol is used for the incident in which the
damage is slight and there is not high probability of
occurrence.
If you cannot avoid the incident in question, an accident
of physical damage may be caused.
Indicates the safe way of using the machine as well as
precautions to avoid accidents that may result in
property damage.