DISCO DAD361 데이터 유지 관리 매뉴얼 - 페이지 10
{카테고리_이름} DISCO DAD361에 대한 데이터 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DISCO DAD361 20 페이지. Automatic dicing/cutting saws
DISCO DAD361에 대해서도 마찬가지입니다: 유지 관리 매뉴얼 (20 페이지)
페이지 인쇄
- 1. Read Carefully before Using this Manual
- 2. Introduction
- 2. Table of Contents
- 3. Contents
- 4. C. General Description of Data Screen
- 5. Important Safety Information
- 5. General Safety Precautions
- 5. Safety Precautions to be Observed During Operation
- 5. Inherently Hazardous Areas and Ways to Avoid Hazards
- 5. EMO Switch
- 5. Operations
Axis Arrangement Diagram [321/351/361]
The diagram and the table below show axis arrangement, names and functions
of each axis.
X-axis
Y-axis
Z-axis
θ -axis
Spindle Shaft
Section
Main Body Frame
Spindle axis
θ
-axis
(except 351)
X-axis
Front
Name
Moves the chuck table to the right and the left.
Moves the spindle shaft and the microscope forward
and backward.
Moves the spindle up and down.
Rotates the chuck table.
Rotates a blade at a high speed.
Supports the machine main body.
Function
Intro-6
Z-axis
Y-axis
Main body frame