Aercus WH24 교체 지침 - 페이지 3

{카테고리_이름} Aercus WH24에 대한 교체 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Aercus WH24 3 페이지. Outdoor sensor array for weather ranger and weather sleuth stations

Step 5: Disconnect the cable (marked J5) from the PCB (circuit board) as shown in Figure 3. If

you trace this cable from the hole leading to the solar shield, to confirm you are disconnecting

the correct cable

Figure 3: Removing the signal cable from the PCB

Step 6: Gently pull out the whole Thermo/Hygro sensor, taking care to feed the cable through

and cable routing or ties.

Step 7: Install the new Thermo/Hygro sensor and reverse the disassembly process.

Figure 4: Installing a new sensor