Discount Car Stereo 3.5-BKRCD 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} Discount Car Stereo 3.5-BKRCD에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Discount Car Stereo 3.5-BKRCD 3 페이지. Pod & aux adapter for becker with cd changer

페이지 인쇄

Fig. 4

iP-BKRCD

6. IP-BKRCD:

Connect YELLOW, BLUE, GREEN plugs (See Fig. 4) to C-1, C-2 and C-3

radio chambers vacated in step 5.

7. Connect factory YELLOW, BLUE, GREEN plugs removed in step 5 to 20-

pin RED connector (See Fig. 4)

8. 3.5-BKRCD:

Connect BLUE plug (See Fig. 5) to radio chamber C-1 vacated in step 4.

9. Carefully route 30-pin dock connector OR 3.5mm jack (See Fig. 5) to

glove box, center armrest or location where the audio device will

reside

Fig.5

30-pin dock/3.5mm jack

Test Operation

Fig. 5

3.5-BKRCD

Disclaimer

• This product has no affiliation with Porsche, Becker or Apple

• We're not liable for misuse of this product.

•We recommend professional installation.

document is subject to change without notice. Other products and companies referred

to herein are trademarks or registered trademarks of their respective companies or

mark holders.

iP-BKRCD: Connect Apple 30-pin device (iPod, iPhone) to dock

connector

2. Apple device will begin charging

3. 3.5-BKRCD: Connect audio device to the 3.5mm plug

4. Turn radio "ON" press "CD" button

5. Select favorite track using audio device built-in controls.

Playlist and Track selection is *NOT* possible from the

radio. You must use the Audio device built-in controls to

access music files.

6. Use radio volume button to set playback level

7. If successful proceed to re-install radio. (Removal Tools not required

for installation.

These adapters require a working CD changer to work as

described. Porsche PCM1 (BE2580), CR-210, CDR-210, CR-

22 and CDR-22 and other Becker radios do not have AUX

ports and for that reason a CD changer is required.

Do not purchase this part if vehicle does not have a

functioning CD changer which remains connected but

will no longer play.