Discount Car Stereo A2D-BKR 빠른 시작 설치 매뉴얼 - 페이지 3

{카테고리_이름} Discount Car Stereo A2D-BKR에 대한 빠른 시작 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Discount Car Stereo A2D-BKR 9 페이지. Music streaming module for becker radios with aux menu option
Discount Car Stereo A2D-BKR에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (10 페이지), 빠른 시작 설치 매뉴얼 (10 페이지)

페이지 인쇄

Optional Install notes for Ferrari Cascade radios (e.g. BE6112 etc.) and

others with factory Bluetooth Hands-Free Kit

Optional T-harness (See Fig. 4b) required to retain cluster display (see Fig. 4a)

and/or factory hands-free calling options.

To install:

1. Connect blue ISO plug from step 2 to black connector on T-harness (Fig. 4b)

2. Connect blue plug from T-harness to C-3 slot on radio vacated in step 2.

3. Proceed to step 4 below.

Optional T-harness NOT required in vehicles without cluster

display and/or Bluetooth hands-free

Fig. 4

8-way plug

Fig. 4a

optional T-harness

Most Becker radios are coded and will not operate

without the code. Do not proceed to step 4 if radio code

is not available otherwise radio will not operate upon

reconnection.

Optional AUX input option:

If optional AUX input was added to kit, connect included 3.5mm male-male cable

(See Fig. 5) to aux jack on module (See Fig. 6) and route other end to dash area

or where aux device will reside (within 3 feet)

Fig. 5

Disconnect factory 8-pin plug from chamber A on radio (See Fig. 3)

Fig. 4b

Fig. 6