Discount Car Stereo A2D-T0Y03 설치 매뉴얼 - 페이지 2

{카테고리_이름} Discount Car Stereo A2D-T0Y03에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Discount Car Stereo A2D-T0Y03 4 페이지.

페이지 인쇄

PRODUCT SAFETY & DISCLAIMER

READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE

PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY

•

This installation guide is provided as a GENERAL installation guide, some vehicles vary and

may require additional steps. We do not accept responsibility for third party labor

charges or modifications. Exercise due-diligence when installing this product.

•

We do not accept any responsibility for vehicle damage or personal injury resulting from

the installation of this product.

•

Careless installation and operation can result in equipment damage

Requirements:

CD CHANGER CONTROLLING RADIO

Introduction:

Just because you drive an older car does not mean you settle for old

technology. The A2D-TOY03 updates select 2003-12 Toyota/Lexus/Scion

radios to support music streaming connection from Smartphone, Tablet, Kindle

and more.

The A2D-TOY03 has the option to retain SiriusXM (if subscribed) or a remote

CD changer or both. The module connects to the radio 12-pin socket and after a

short paring session, users are able to enjoy the best sound possible on the

car speakers!

See Frequently Asked question at the end of this guide for more details.

Installation:

Remove Toyota radio from dashboard to gain access to the

connectors. (Vehicle specific radio removal instructions are not part

of this guide, but available upon request)

2. Locate 12-pin radio socket (See Fig. 2). If socket t is empty, simply

plug-in the module 12-pin plug (See Fig. 1) and proceed to "Pairing"

section on page 3.

Pairing:

The pairing process varies among devices but the basic steps are the same.

Pairing is done upon initial install and will not have to be repeated.

2. Select

3. Tap "

4. Wait for the Bluetooth device name to appear and select it. (See Fig. 3-

Fig. 1

12-pin plug

3. If vehicle has XM module or remote CD changer; disconnect 12-pin

plug (See Fig. 1) from radio and connect to 12-pin socket on module

harness.

4. Connect module harness 12-pin plug to radio socket vacated in step 3.

5. Proceed to pairing.

Settings, Wireless & Networks, Bluetooth Settings

Go to device

Bluetooth

and turn on.

Scan" or "Search" for devices

not retaining factory option or Fig4- retaining factory option)

Fig. 3

Fig. 2

Radio 12-pin connector