Discount Car Stereo A2DIY-CDR30 빠른 시작 설치 매뉴얼 - 페이지 3
{카테고리_이름} Discount Car Stereo A2DIY-CDR30에 대한 빠른 시작 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Discount Car Stereo A2DIY-CDR30 8 페이지. For porsche cdr30/31 radios
페이지 인쇄Suggestions:
1. Left foot well Fuse box at Row C, Fuse 1 (7.5A/15A) 986, 981
2. Kick Panel Fuse box at Row B, Fuse 9 (7.5A) 987
3. Or remove hand-brake cover and tap the orange wire (See Fig. 5)
harness below brake lever
Always connect to an accessory supply otherwise kit
will not work as intended. Keep in mind Accessory
supply may also power other equipment and may be
prone to noise. If needed purchase a Noise Filter (e.g.
NF3A) and verify voltages prior to finalizing install.
Connect included 3.5mm male to male audio cable (See Fig. 6) to module
5.
"AUX" input jack (See Fig. 7) and route other end to front of the dash where
aux device will reside within 3ft.
Fig. 4
Accessory wire
Fig. 5
Fig. 6
audio cable
Fig. 7
Module inputs
Connect push button 1/8" plug to Module "CTR" jack (See Fig. 7), route
6.
button to the front of the dash, remove tape backing and attach to
dashboard (cable is 6ft. long) (See Fig. 8)
Install microphone (See Fig. 9) to visor or headliner using included
7.
visor clip (See Fig. 9a).
Fig. 8