Discount Car Stereo A2DIY-GM3 빠른 시작 설치 매뉴얼 - 페이지 3

{카테고리_이름} Discount Car Stereo A2DIY-GM3에 대한 빠른 시작 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Discount Car Stereo A2DIY-GM3 8 페이지. Bluetooth for select 2000-07gm class -ii radios

페이지 인쇄

5. Connect installation harness 22-pin Molex plug (See Fig. 2) to module 22-

pin Molex connector (See Fig. 3)

Fig. 3

6. Connect included male-to-male audio cable (See Fig. 4) to module AUX

jack (See Fig. 3) and route to dashboard area where audio device will

reside (within 3 ft.)

3.5mm male to male cable

7. Connect push button 1/8" plug to Module "CTR" jack, route button to front

of the dash, remove tape backing and attach to dash (cable is 6ft. long).

(See Fig. 5)

Noteworthy: Push button not required for Android devices because its

(2) functions can be performed from included smart remote. Push button

however is required for all Apple devices.

Fig. 4

Fig. 5

push button

8. Use clip to install microphone to visor or headliner and route cable down

pillar, under dashboard toward module location and connect to module

"MIC" input.

Exercise caution when routing both cables so to not damage the cables.

Also ensure no ventilation duct is pointed towards microphone.

Microphone

Fig. 6