Discount Car Stereo A2DIY-JAG98R 빠른 시작 설치 매뉴얼 - 페이지 11

{카테고리_이름} Discount Car Stereo A2DIY-JAG98R에 대한 빠른 시작 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Discount Car Stereo A2DIY-JAG98R 11 페이지. Bluetooth for 1997-06 xk (x100)and 1998-03 xj (x308)standard audio with cd changer

페이지 인쇄

4. After installing and testing the system everything works, but there is

engine "whine". (increases with RPM) What can I do to fix this?

Ensure all connections are snug.

If powering module with cigar lighter: remove device plugged into cigar

port.

Relocate accessory wire,

Install a suitable

noise

filter.

5. Which devices can be charged on the USB charging port?

Optional "Fast charge" USB port Supports BC1.2, QC2.0, QC3.0, PE1.1, PE2.0,

FCP, SFCP fast charge protocols (Apple, Samsung, Huawei etc). IPhone "Fast

charge" kicks in when the battery capacity is between 0% and 79%, but

returns to regular charge mode when it reaches 80%.

6. How do I listen to the CD changer or AUX device?

In order to listen to CD's or AUX, press push-to-talk button or play/pause

button on remote control.

7. Can I install the A2DIY-JAG98R at the CD changer plug in trunk/hatch?

NO;

the A2DIY-JAG98R module connects to the radio behind the dash.

8. What is the vehicle application and where does the module connect?

The A2DIY-JAG98Ris specific to the following Jaguar vehicles:

1997*-03 (x308) (To Radio)—Standard audio system only

1997*-06 (x100) (To Radio)—Standard audio system only

9. I hear clicking sounds as I use my device, how can I stop this?

Go to device settings and disable touch sounds.

10. My module does not always pair when entering vehicle. How to I

remedy this?

Module may not pair if trying to pair with another device (last connected

device). Should this happen, check that no other device has been paired,

turn ignition off and back on or disable/enable Bluetooth on audio device.

11. It is possible to change Bluetooth name to my own?

This may be possible on some devices but not so on recent iPhones:

Make sure module is powered on and connected.

Go to Phone settings and tap Bluetooth.

Tap next Next to LANNI, then tap Name

Enter a new name (e.g. Jaguar-BT etc.) tap Done on keyboard, then tap

The custom name given now appears in Bluetooth settings of your device.

12. Playback is distorted, how do I fix this?

if playback is distorted its likely because volume setting on audio device is

too high. To fix, turn radio volume up to comfortable level, then lower

volume on device until it no longer distorts.

13. What's the major difference between optional push-to-talk button with

built-in microphone and visor mount microphone?

The only major difference is convenience. With the single button there is no

need to route microphone cable to visor etc. Push-to-talk button with built-

in microphone must be installed away from ventilation ducts etc. and

attaches to the dash with 3M tape.

*1997 VIN#812317 and above

Disclaimer

• This product has no affiliation with Jaguar

• We're not liable for misuse of this product.

•We recommend professional installation

For help email

[email protected]

subject to change without notice. Other products and companies referred to herein are

trademarks or registered trademarks of their respective companies or mark holders.