Discount Car Stereo BT45-JAG 빠른 시작 매뉴얼 - 페이지 3
{카테고리_이름} Discount Car Stereo BT45-JAG에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Discount Car Stereo BT45-JAG 10 페이지. Bluetooth kit for jaguar xk and xj with cd changer
Discount Car Stereo BT45-JAG에 대해서도 마찬가지입니다: 설치 매뉴얼 (10 페이지)
페이지 인쇄Remove cable from holding tab
3.
Disconnect CD changer by gently pulling apart
4.
You should not have cable as seen in Fig. 2. Female connector (right) –
5.
from CD changer, male plug (left) – to amplifier or radio
Fig. 2
Connect factory Male plug (See Fig. 2) to audio module female connector.
6.
To connect, simply align markers and push in
Connect audio module right-angle plug (See Fig. 3b) to CD changer female
7.
connector in Fig. 2
Warning:
Our right-angle male plug (See Fig. 3b) does not have an
alignment arrow indicator; however, imaginary arrow seen in Fig. 3b
must align opposite arrow indicator on factory CD changer connector
in Fig. 2 Once aligned mate both
(do not
(Don't wiggle or twist)
(avoid
twisting)
twist).
Fig. 3b
Return cable to holding tab
8.
Connect supplied 3.5mm audio cable (See Fig. 4) to audio module 3.5mm
9.
jack (See image below)
Proceed to next step (routing audio cable).
10.
Noteworthy:
They are multiple Ai-Net type plugs/connectors at audio rack and more so
in vehicles with premium systems (e.g., Amplifier, Navigation etc.). In
premium audio systems, audio module (See Fig. 3) connects between CD
changer and amplifier and in standard systems; between CD changer and
radio.
To minimize connecting errors, locate single black cable emerging
from CD auto changer --- seen in Fig. 2 (right). This is the cable with
which you will be working. Connecting audio adapter to something other
than CD auto changer plug will result in volume issues, loss of power (radio)
etc.