Armytek Optoelectronics Wizard Pro 사용자 설명서

{카테고리_이름} Armytek Optoelectronics Wizard Pro에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Armytek Optoelectronics Wizard Pro 2 페이지.

페이지 인쇄

Armytek Wizard Pro

The most technically advanced flashlights in the world.

Specifications

Armytek Optoloelectronics Inc. is a Canadian manufacturer that produces powerful and reliable flashlights designed

especially for your needs applying in them components made in USA and Japan. 10 years no-hassle warranty.

Extremely powerful light 1200 lumen with constant brightness during the whole operation time



Effective TIR-optics, which provides flood wide light for close application and for distances up to 80 meters



Reliable and comfortable headband for convenient continuous usage

Compact and light-weight flashlight without loss in reliability and durability



Record runtimes — up to 100 days — and multi-color battery indication for well-timed battery change



Side switch for simple one-hand operation and quick access to the main modes



Complete correspondence to the highest standards of water resistance — submersible to 10 meters



Model

LED

Optics

Brightness stabilization type

Light output, LED lumen

Hotspot/spill

Beam distance

Hotspot diameter at 16 feet / 5 meters

Modes and runtimes

(measured for Panasonic 18650 Li-Ion

NCR 3100 mAh to the decrease to 10 %

of initial brightness )

Recommended power source

Size

Length 4.06"/ 103mm, body diameter 0.83"/ 21mm, head diameter 1.3"/ 33mm

Weight

Set description

1. Depending on the model, your headlamp can inconsiderably differ from the pictures in the manual.

2. The producer reserves the right to change the package at his own discretion without modifying this

manual.

Thank you for choosing the products of Armytek Optoelectronics Inc., Canada.

Please read this manual carefully before using the flashlight.

Wizard Pro

Cree XM-L2

TIR

FULL stabilization (constant brightness)

1200 lm

70°/ 120°

80 m

7 m

Firefly1: 0.5lm/100d

Firefly2: 7lm/9d

Main1: 50lm/30h

Main2: 250lm/7h

Main3: 500lm/3h

Max: 1200lm /1h

Strobe1: 0.6Hz

Strobe2: 10Hz

1x18650 Li-Ion / 2xRCR123 Li-ion / 2xCR123A

1.98oz / 56g (without batteries and headband)

Items included in the package:

Headlamp



Headband (two straps)



Silicone holder



2 spare O-rings

Clip



User manual



Born to exceed.

USER MANUAL

Wizard Pro

oﬀ

max

Cree XM-L2 (Warm)

main 3

TIR

main 2

Now you can specify the battery type:

1120 lm



1 click for 1 x 18650 Li-Ion battery, default value.

70°/ 120°



2 clicks for 2 x CR123A lithium batteries.

80 m



3 clicks for x RCR123 Li-Ion batteries.

After the choice is made the light will flash 1, 2 or 3 times to show the battery type chosen.

7 m

Firefly1: 0.4lm/100d

We recommend NOT to leave power sources inside the flashlight for a long storage period, as batteries

Firefly2: 6lm/9d

(especially, non-rechargeable) can leak for various reasons and damage the inner parts of the flashlight. If

Main1: 47lm/30h

you want to keep your flashlight in a stand-by state with batteries in, use new and quality batteries, store the

Main2: 230lm/7h

flashlight in acceptable for batteries operational temperature and revise the batteries' state at least once a

Main3: 465lm/3h

month. If you have noticed any signs of batteries' defects, withdraw them from the flashlight and take out of

Max: 1120lm /1h

Strobe1: 0.6Hz

operation. It is also recommended to replace discharged batteries with new ones before the storage as the

Strobe2: 10Hz

chance of leakage is higher with discharged batteries.

To set/replace batteries:

1. Unscrew the tailcap.

2. Place the batteries with the positive contact (+)

3. Adjust the tailcap and tighten it as far as it can go.

After placing the battery it is recommended to carry

out the procedure of choosing the battery type through

the built-up headlamp menu. To access the Menu

press and hold the switch button (when the headlamp

1x18650 Li-Ion

is switched off). The headlamp will switch on, go

through the all available modes and then switch off

ﬁreﬂy 1

2xCR123A

again. After switching off, release the button quickly

ﬁreﬂy 2

and click it rapidly again. The headlamp will enter the

main 1

2xR123 Li-Ion

Menu and the LED will flash about 3 times a second.

To use the light with the headlamp:

1. Connect the secondary strap with the silicone holder (fig.1).

2. Pass the ends of the main strap through the loop of the secondary strap and

slots in the silicone holder (fig. 2b), conjoin them in a ring (fig. 2c). Pass the

loose end of the main strap through the loop of the secondary one in the

opposite direction and fix it in the buckle (fig. 2d).

Fix the headlamp in the headband (fig. 3) and adjust the elastic bands to the

size of your head.

The most technically advanced flashlights in the world.

www.armytek.com

Born to exceed.

Initial Service

facing the head of the flashlight.