BLADEZ JET BIKE 소유자 매뉴얼 - 페이지 7
{카테고리_이름} BLADEZ JET BIKE에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. BLADEZ JET BIKE 12 페이지.
페이지 인쇄
ASSEMBLY AND USE GUIDE CONTINUED
Important:
This tensioning control (O) is equipped with an emergency braking system which, produces a
much sharper braking effect.
LEVELING
Once the unit has been placed into its final position, make sure that it sits flat on the floor and
that it is level. This can be achieved by screwing the adjustable feet (13) up or down, as
shown in Fig 7.
MOVEMENT & STORAGE
The unit is equipped with wheels (15) Fig (8) , to make it easier to move. The wheels located at
the front of your unit make it easier to move it into a chosen position, by lifting the rear of the
unit up slightly and pushing it, as shown in Figure 8. Store your unit in a dry place, preferably
not subject to changes in temperature.
BRAKE ADJUSTMENTS
Brake shoe adjustments
1. To adjust the brake shoes, turn the tensioning control (23) to minimum position "0", see Fig.
A.
2. Loosen the holding screws for the two shoes (35) and bring them closer to the flywheel
(39), then retighten the screws (35).
3. Spin the flywheel (39) to make sure that the brake shoes are not grabbing.
BLADEZ FITNESS RESERVES THE RIGHT TO MODIFY THE SPECIFICATIONS OF ITS
PRODUCTS WITHOUT PRIOR NOTICE.
Page 6