Discount Car Stereo A2D-AIMV1 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} Discount Car Stereo A2D-AIMV1에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Discount Car Stereo A2D-AIMV1 6 페이지.

Pairing

Pairing process varies among devices but basic steps are the same. This

process is done upon initial install and will not have to be repeated.

Turn Ignition and Radio "ON"

Green LED inside module peephole will flash (pairing mode)—some

clicking may also be heard (this is normal)

Settings, Wireless & Networks, Bluetooth

2. On A2DP device: Go to

Settings

Bluetooth

3. Select

and turn on.

4. Go to Bluetooth settings

(Search)

5. Tap Scan

for devices.

6. Wait for below Bluetooth device name (see Fig. 7) to appear then tap to

select.

Green LED inside module peephole will glow steady (paired)

Fig. 7

Operation

Turn ignition to accessory position and radio ON.

2. Press "CD" button.

3. Launch audio device streaming application.

4. Set audio device initial volume to 50%, then raise radio volume control

button to set playback level. If distorted, lower audio device volume.

Warning: Playlist and Track selection is *NOT* possible from the radio.

You must use Smartphone built-in controls to access music files

To play CD's

a. Press "CD" button on radio

Disable Bluetooth

on audio device (e.g., Smartphone) CD playback resumes.

Control CD changer from radio buttons as customary.

2. To resume streaming:

Re-enable Bluetooth

on audio device.

Note: Streaming has priority and remains until device is no longer paired. CD

changer playback is only possible when not paired or device is out of range

If correct operation is confirmed go ahead and reinstall rack and panels.

Fig. 8