Discount Car Stereo A2D-JAG 설치 매뉴얼 - 페이지 4

{카테고리_이름} Discount Car Stereo A2D-JAG에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Discount Car Stereo A2D-JAG 6 페이지. For jaguar x308 & x100 with cd changer

페이지 인쇄

Fig. 9

Adapter female (left) & male (right) connections

10. Connect the male plug from adapter into Radio

11. Connect the Red Accessory wire (See Fig. 10

12V Accessory supply source (See Fig. 11

Fig.

Fig. 10 10 10 10

Fig.

Fig. 11

Radio 12-pin Plug

Fig. 10) to suitable

Fig. 10

Fig. 11)

Fig. 11

Warning:

Warning

The red wire must be connected to 12V accessory

supply wire controlled by the ignition

supply wire

controlled by the ignition. Using the included T-

controlled by the ignition

Tap, it is possible to obtain a 12V ACC supply by tapping into the

white lead on Radio's 12-pin plug (See Fig. 11

12. Secure adapter and proceed to next section

Pairing:

The pairing process varies from Phone to Phone but the basic steps

are the same. This process is done upon initial install and will not

have to be repeated

1. Turn ignition and Radio "ON"

Blue LED inside adapter peephole will flash (pairing mode)

2. On device (e.g. Phone): Go to

Networks, Bluetooth Settings

Bluetooth

3. Select

Bluetooth

and turn on (if not already ON).

4. Then select Bluetooth settings

Scan for devices

5. Tap

6. Wait for the Bluetooth device name to appear and select it.

(See below)

Blue LED inside adapter peephole will glow steady and you will

hear a confirmation tone.

Note:

Pair multiple devices but only one connection is supported.

accessory

Fig. 11)

Fig. 11

Settings, Wireless &