Discount Car Stereo A2DIY-JAG98 빠른 시작 블루투스 설치 매뉴얼 - 페이지 3

{카테고리_이름} Discount Car Stereo A2DIY-JAG98에 대한 빠른 시작 블루투스 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Discount Car Stereo A2DIY-JAG98 11 페이지. Bluetooth 1997-06 xk (x100)and 1998-03 xj (x308) with cd changer
Discount Car Stereo A2DIY-JAG98에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (11 페이지)

페이지 인쇄

4. Once separated, female connector (right) leads to changer and male

plug (left) leads to amplifier or radio (See Fig. 3)

Fig. 3

5. Align markers and connect factory male plug to module female

connector. Avoid twisting. See Fig. 4)

Fig. 4

6. Connect module 90-degree male plug (See Fig. 3) to CD changer

female connector (See Fig. 3/4)

Warning: Ai-NET terminals are "keyed" and risk damage if not properly

aligned. The audio module right-angle plug (See Fig. 4a) does not have an

alignment marker; Use imaginary marker (arrow) shown in Fig. 4a when

connecting this plug to the CD auto changer connector (See Fig. 3),

otherwise risk damaging plug.

Fig. 4a

Noteworthy:

There are multiple Ai-Net type plugs/connectors leading from components

on audio rack and more so in vehicles with premium sound (e.g., Amplifier,

Navigation, etc.). In premium systems, audio module connects between CD

changer and amplifier and in standard systems (no amplifier) between CD

changer and radio.

To minimize connecting errors, locate single black pigtail on

the CD auto changer

– (female cable seen in Fig. 3/4.)

audio module to something other than CD auto changer will result in low or

no audio playback, no power to radio etc.

7. Route audio module 8-pin plug to center console area.

Connecting