Discount Car Stereo A2DIY-STS 빠른 시작 매뉴얼 - 페이지 3
{카테고리_이름} Discount Car Stereo A2DIY-STS에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Discount Car Stereo A2DIY-STS 9 페이지. Bluetooth module for 2005-11cadillcac sts with xm module(u2k)
Discount Car Stereo A2DIY-STS에 대해서도 마찬가지입니다: 빠른 시작 설치 매뉴얼 (9 페이지)
페이지 인쇄Radio 16-pin connector
Disconnect factory 16-pin XM plug (See Fig. 4) from radio (See Fig. 3).
4.
To disconnect, pull back BLUE locking tab, press BLACK tab, gasp and
pull plug from radio. (See Fig. 4)
:
Warning
To avoid connecting errors, all 16-pin connectors are "keyed".
The 16-pin plug (See Fig. 4) included in this kit is "Keyed" and will only fit
the radio XM port (See Fig. 3)
Avoid pulling on wired. Grasp plug to remove.
Connect factory 16-pin plug to harness 16-pin connector (See Fig. 5)
5.
Fig. 3
Fig. 4
16-pin plug
Fig. 5
16-pin connector
Connect harness 16-pin plug to radio chamber vacated in step 4
6.
Secure BLACK (ground) wire to vehicle chassis or remove radio
7.
chassis screw and secure ground wire to radio as seen in Fig. 6
Fig. 6
Warning for vehicles with Bose amplifier: The radio provides module
with 12V accessory power. If vehicle has a Bose amplifier; the radio does
not supply enough current to power module and turn on factory amp.
(Module play will be distorted or intermittent). If this should happen
please disconnect red wire from harness, connect to extension cable
included in kit (See Fig. 7) then connect extension to alternate 12V
accessory source in vehicle (e.g. Fuse box, cigar lighter etc.)