Discount Car Stereo BLU-C6 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} Discount Car Stereo BLU-C6에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Discount Car Stereo BLU-C6 6 페이지. Music streaming kit for c6 corvette without xm tuner module or 6-disc changer

페이지 인쇄

Fig. 4

connector

6. Connect installation harness 12-pin plug (See Fig. 3) to radio 12-pin

connector

7. Ensure module dip-switches #3 and #8 are "ON" or down (See Fig. 5)

Fig. 5

8. Connect installation harness 22-pin Molex plug to module 22-pin Molex

connector (See Fig. 6)

Fig. 6

9. Connect/Tap installation harness yellow wire to +12V Battery

(constant) supply

10. Connect/Tap installation harness black wire to Ground.

11. Crimp red accessory wire to blue connector on fuse tap (See Fig.7)

After crimp pull wire to verify crimp integrity.

Fig. 7

fuse tap

12. Remove HTD Seat/WPR RLY (heated seat/wiper relay) fuse from fuse

box. (See alternate 12V accessory sources on next page).

supply ensures module turns "ON" only when vehicle is in operation.

13. Insert factory fuse from step 12 to empty fuse slot on fuse tap (See

Fig. 7)

14. Insert fuse tap to fuse box slot vacated in step 12

Noteworthy: If heated seat/wiper relay fuse is missing, fuse tap empty

slot remains empty. Turn ignition "ON" to verify module LED is flashing,

otherwise user voltmeter or test light to test fuse slot for power

and/or check crimp integrity as often times a bad crimp could result

in no power. Other possible sources for accessory supply are circled

below.

Accessory