Discount Car Stereo PXDPFB 빠른 시작 - 페이지 3
{카테고리_이름} Discount Car Stereo PXDPFB에 대한 빠른 시작을 온라인으로 검색하거나 PDF를 다운로드하세요. Discount Car Stereo PXDPFB 4 페이지.
페이지 인쇄Connect installation harness 22-pin plug (See Fig. 4) to Module 22-pin
6.
connector (See Fig. 5)
Fig. 5
22-pin Molex connector
Set dip switches # 2 & # 8 to "ON" (down). All others remain "OFF" (up)
7.
Fig. 5
Connect dock cable 8-pin pluge (See Fig. 6) to Module. (See Fig. 5)
8.
Route 30-pin dock connector to front of dashboard or location or
9.
choice (within 10 ft.)
Fig. 6
30-pin dock connector
Test Operation:
Turn ignition and radio "ON"
1.
Press "CDC" button on radio to enter changer/Aux mode
2.
Connect apple device to dock connector
3.
Device should begin charging
4.
Start playback and enjoy tunes on car speakers.
5.
Use radio volume control button to set the playback level.
6.
Playlist and Track selection is *NOT* possible from radio
buttons. Use audio device built-in controls or wireless remote
to access and control audio files and applications.
If correct operation is confirmed, reinstall radio:
7.
To reinstall radio simply remove keys from keyhole, align radio to dash
opening and slide into cavity until it locks in place.