Discount Car Stereo A2D-C5 설치 매뉴얼 - 페이지 5

{카테고리_이름} Discount Car Stereo A2D-C5에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Discount Car Stereo A2D-C5 10 페이지. For 1997-04 corvette with functioning 12-disc cd changer
Discount Car Stereo A2D-C5에 대해서도 마찬가지입니다: 빠른 시작 설치 매뉴얼 (12 페이지)

페이지 인쇄

Where to get 12 Acc. supply

1997-03: Many have a 3-pin plug under passenger toe board near BCM (may be

covered in black duct tape) -- See Fig.8 Yellow wire is ACC.

have 3-pin plug; go to Alternate 12V Acc. supply below.

Note: 3-pin plug may not be present in all vehicles.

Alternate 12V Acc. supply

Fuse #22 or #11 of interior fuse box

passenger toe board (See Fig. 9).

The add-a-fuse

mini-tap

circuit seen in Fig. 9a is included for this purpose.

If vehicle does not

Fig. 8

which is located under

Fig. 9

How to use Add-a-fuse circuit

a. Strip 1/4- 3/8" insolation from end of accessory wire.

b. Look inside blue connector where metal ends. (useful in step d)

c. Insert stripped wire to blue connector

d. Hold wire in place and crimp down (crimping tool or plyers). After

crimp, pull wire to verify crimp integrity.

e. Remove fuse #22 or #11 (if present) from vehicle fuse box otherwise

skip to step g.

Insert factory fuse to empty slot on add-a fuse circuit (See Fig. 9a)

g. Insert add-a-fuse circuit to fuse box slot #22 or# 11

Noteworthy: If there is no fuse in slots #22 or #11, the fuse slot on add-a-fuse

tap remains empty. (See Fig. 9a) Turn ignition "ON" to verify module LED is

flashing, otherwise test fuse slot for power and/or check crimp integrity,

Add a circuit

Fig. 9a