Discount Car Stereo A2DIY-C5CD 설치 매뉴얼 - 페이지 3
{카테고리_이름} Discount Car Stereo A2DIY-C5CD에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Discount Car Stereo A2DIY-C5CD 10 페이지. Bluetooth kit for 1994-07 corvette
Discount Car Stereo A2DIY-C5CD에 대해서도 마찬가지입니다: 빠른 시작 설치 매뉴얼 (10 페이지), 빠른 시작 설치 매뉴얼 (10 페이지)
페이지 인쇄
Playback options explained
These options are available at checkout:
1. Retain changer playback (default)
2. Auxiliary input (instead of changer playback)
3. Auxiliary input + changer playback (both)
Retain Changer playback
Default option that allows users to retain use of their 12-disc changer.
Proceed to installation step 4.
AUX input
(instead of changer playback)
This option allows users to connect and play a portable audio device (e.g.
sat radio, Alexa, iPod, Mp3 etc.) instead of 12-disc changer)
WARNING: The required CD changer remains connected but will no
longer play. (At least one disc must be loaded to magazine)
Connect included 3.5mm audio cable (See Fig. 4) to module "AUX" jack
1.
2. Route audio cable plug to where audio device will reside (within 3 ft.)
3.
Proceed to installation step 4.
AUX Jack+ changer playback
With this option, AUX plus 12-disc changer playback are possible.
1.
Route installation harness aux jack (See Fig. 5) to glove box, dash area
etc. (cable is 3 ft. long)
2. Drill a ¼" hole in dash or panel and secure jack with included nut or
leave freestanding.
3. To listen to audio device (e.g. Mp3 player) simply connects to jack. To
listen to the CD changer, disconnect audio device from jack
must be empty during changer
playback).
Proceed to installation step 4
:
:
(jack
Module
Fig. 4
3.5male to male audio cable
Fig. 5
4. Connect push-to talk button 1/8" plug to Module "CTR" jack, route
button to front of the dash, remove tape backing and stick to dash
(cable is 6ft. long). (See Fig. 6)
Fig. 6
push-to-talk button