Discount Car Stereo AAI-SONY 설치 매뉴얼 - 페이지 3

{카테고리_이름} Discount Car Stereo AAI-SONY에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Discount Car Stereo AAI-SONY 4 페이지.

Installing: Apple iOS lightning cable

Connect adapter cable left + right RCA terminals to radio BUS AUDIO INPUTS

2. Connect (Splice) RED wire to Sony radio accessory wire (usually red)

3. Connect (Splice) BLACK wire to Sony radio ground wire (usually black)

4. Connect Unilink BUS plug to radio UNILINK CD CHANGER socket

5. Route Lightning plug to dash area or to within 4 ft.

Installing: USB terminal

Connect adapter cable left + right RCA terminals to BUS AUDIO INPUTS

2. Connect (Splice) RED wire to Sony radio accessory wire (usually red)

3. Connect (Splice) BLACK wire to Sony radio ground wire (usually black)

4. Connect Unilink BUS plug to radio UNILINK CD CHANGER socket.

Terminal mount option:

A. Flush to dash/panel requires drilling a ¾" hole in the dash

B. Flush with Support bracket (use this option to mount USB terminal

wherever your installation demands without drilling)

C. No USB Mount- (default)

Flush to Dash or Panel

Drill a ¾" hole in dash or panel using a step drill bit or equivalent (See

Fig. 13)

(req. drilling)

Fig. 2

Step drill bit

Insert 3ft. USB cable (See Fig. 14) through ¾" hole created in step 1

Fig. 2

3 ft. USB cable

Snap USB header (See Fig. 3) until flush with mounting surface (See

Fig. 4)

Fig. 3

Flush mount USB Terminal

Fig. 4

Flush mounted to dash

Tuck and secure any extra wire from moving parts and proceed to test

operation