BLADEZ ION 150 제품 핸드북 - 페이지 10

{카테고리_이름} BLADEZ ION 150에 대한 제품 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. BLADEZ ION 150 13 페이지. Electric power board
BLADEZ ION 150에 대해서도 마찬가지입니다: 문제 해결 절차 (12 페이지)

페이지 인쇄

RECOMMENDED TOOLS

To adjust and service the Bladez ION Power Board you will need the following tools:

•

• Allen Keys:

•

• Wrenches:

•

• Philips Head Screwdriver

•

• Hand bicycle pump

•

• Oil, Grease or Lubricant (such as WD-40)

BRAKING SYSTEM

The ION uses a rear wheel drum brake system activated by a hand lever (on the left

side of the handlebar). The brake is activated by squeezing the BRAKE LEVER with

your left hand. The ION is equipped with a controller that temporarily disengages the

power to the motor when the BRAKE LEVER is depressed.

Practice braking on a smooth, dry surface to get used to the feel of the braking system.

Braking distance is affected by wet conditions and loose and uneven riding surfaces.

The brakes are relatively maintenance free and come adjusted to the proper setting

from the factory.

TIRES AND WHEELS

It is recommended that the front tire is inflated to 40 PSI. During shipping, the tire might

be slightly deflated. The rear tire is solid rubber.

To Inflate the Tire

Fig. 7

The Bladez ION uses a pneumatic tire in the front and a solid tire in the rear. The front

wheel is actually two halves (split-rim) bolted together to make it easier to remove or

replace the tire. Empty all air from the tire, prior to loosening the bolts to split the rim.

• 3 / 4 / 5 / 6mm.

• 10 / 13 / 16 mm Open and ring combination.

1. Remove the valve stem cover to expose the

valve stem (Fig. 7).

2. Using a standard bicycle pump, inflate the

front tire to 40 PSI and replace the valve

stem cover.