BLADEZ MOBY XS PB-SE823 제품 핸드북 - 페이지 8

{카테고리_이름} BLADEZ MOBY XS PB-SE823에 대한 제품 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. BLADEZ MOBY XS PB-SE823 15 페이지. Powered personal transportation gas power board

페이지 인쇄

PACKAGE CONTENTS

Your Bladez MOBY XS comes with the following items in the box. Please locate all

of the following:

1. The Bladez MOBY XS Power Board

2. Allen Wrench

3. Spark Plug wrench

4. Product Handbook

GETTING STARTED

Please read and understand these instructions and the OPERATING

PROCEDURES section, prior to starting or riding your Power Board.

Attaching The Handlebars

1. When you take the MOBY XS out of the box,

you will need to attach the handlebar to the

scooter. Remove the billet stem cap using

the Allen wrench provided. Place the

handlebar into the groove by lining up the

hole with the screw in the billet stem. (Fig. 3)

2. Replace the billet stem cap and tighten down

the bolts to secure the handlebar. (Fig. 4)

Bladez Corp. • 20155 Ellipse • Foothill Ranch, CA 92610 • (866) 325-2339 • www.ebladez.com

Unfolding

1. Carefully remove the MOBY XS from the

box.

2. To unfold the MOBY XS, begin by

pulling up on the FOLDING HANDLE

with one hand (Fig. 1), while gently

pulling up on the handlebars with the

other.

3. Fully extend the handlebars to their

upright position until you feel the

mechanism lock into place. (Fig.2)

Page 7