BLADEZ PB-SE803 핸드북 - 페이지 8

{카테고리_이름} BLADEZ PB-SE803에 대한 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. BLADEZ PB-SE803 18 페이지. Gas powerboard powered personal transportation

BLADEZ PB-SE803 핸드북

PACKAGE CONTENTS

Your Bladez MOBY comes with the following items in the box. Please locate all of
the following:
1. The Bladez MOBY Power Board
2. Allen Wrench
3. Spark Plug wrench
4. Product Handbook

GETTING STARTED

Please read and understand these instruction and the OPERATING
PROCEDURES section, prior to starting or riding your Power Board
Unfolding
1. Carefully remove the MOBY from the
box.
2. To unfold the MOBY, begin by pressing
down on the FOLDING HANDLE with
one hand (Fig. 1), while gently pulling up
on the handlebars with the other (Fig. 2).
3. Fully extend the handlebars to their
upright position until you feel the
mechanism lock into place (Fig. 3).
4. When you first take the MOBY out of the
box, the BRAKE LEVER and Throttle
LEVER are in the down position for
shipping. Using the provided Allen
Wrench, loosen the tension bolt, and
adjust the levers to a comfortable
position (Fig. 4). * BE CAREFUL NOT
TO PULL ON THE CABLES!
Fueling
This is a two-stroke engine.
Only run the engine using a mixture of
gasoline and 2-cycle engine oil.
PLEASE READ OPERATING
PROCEDURES BEFORE FUELING!
5. Mix fuel (minimum 90 octane) and 2-
cycle engine oil in separate container.
Use Tanaka Perfect Mix or a quality 50:1
2-cycle oil. Make sure the fuel is well
mixed by shaking the container.
6. Make sure that the engine is off!
Page 8 of 18