Discount Car Stereo BT45-JAG 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} Discount Car Stereo BT45-JAG에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Discount Car Stereo BT45-JAG 10 페이지. Bluetooth kit for jaguar xk and xj with cd changer
Discount Car Stereo BT45-JAG에 대해서도 마찬가지입니다: 설치 매뉴얼 (10 페이지)

페이지 인쇄

PRODUCT SAFETY & DISCLAIMER

READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE

PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY



This installation guide is provided as a GENERAL installation guide, some vehicles vary and

may require additional steps. We do not accept responsibility for third party labor charges

or modifications. Exercise due-diligence when installing this product.



We do not accept any responsibility for vehicle damage or personal injury resulting from

the installation of this product.

Careless installation and operation can result in equipment damage



Requirements

CD changer and factory phone plug

Introduction

Safety comes first when you're on the road, so having an intuitive and easy to

use Bluetooth kit is essential to reducing driver distraction. The BT45-JAG kit is

compatible with virtually all Bluetooth phones, and sounds great whether you are

using it for mobile conversations or music streaming. The system will mute

upon initiating or receiving a call and announces callers phone number on car

speaker. The wireless remote control conveniently installed on dashboard is

used to launch Voice Recognition application (Siri, Google Now, Assistant etc.),

initiate phone calls launch applications, track selection and more. Thanks to the

BT45-JAG Kit users keep the radio and car they love while enjoying Bluetooth

features only available on newer

cars.

The BT45-JAG requires a working CD changer (which remains connected

but will no longer play) and factory phone plug (under center armrest)

See Frequently Asked questions at the end of this guide

Notes:

- Vehicle must have a phone plug beneath armrest

- Required CD changer remains connected but will no longer play.

Audio module installation

Remove carpet trim piece around audio rack (See Fig. 1). If vehicle does not

have GPS, use empty slot to access changer plug, however vehicles with

Navigation or convertibles, may require lowering audio rack by removing (4)

8mm and leaning rack forward to reveal wiring.

Locate short CD pigtail. Connects CD changer to radio (Standard systems)

or to amplifier (Premium system).

This is the cable required to complete install (See Fig. 1A)

Fig. 1

Fig. 1A

plug/connector location