Discount Car Stereo JAG-HF 빠른 시작 블루투스 설치 매뉴얼 - 페이지 5

{카테고리_이름} Discount Car Stereo JAG-HF에 대한 빠른 시작 블루투스 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Discount Car Stereo JAG-HF 10 페이지. Bluetooth kit for jaguar xk and xj with cd changer
Discount Car Stereo JAG-HF에 대해서도 마찬가지입니다: 설치 매뉴얼 (10 페이지), 빠른 시작 매뉴얼 (10 페이지)

페이지 인쇄

Factory connector/Plug

Ignition supply wire

10-pin Female (white)

Pin 10 (light green)

10-pin Male (yellow)

Pin 10 (white/green)

14-pin (yellow)

Pin 13 (Green)

18-pin male (yellow)

Pin 5 (Green)

If vehicle does not have a phone plug, simply tap into cigar lighter

supply wires under console: White/Blue= 12V ACC, Black=Ground.

Fig. 12

2. Connect 3.5mm audio plug (routed from trunk) to Bluetooth Module

audio jack (See Fig. 13)

Fig. 13

Audio out Jack

3. Connect supplied (3ft.) audio cable (See Fig. 14) to Bluetooth module

"AUX" input jack, (See Fig. 15) and route other end to dash area or

location where audio device will reside (within 3ft).

Ground wire

Pin 6 (black)

Pin 11n (black)

Pin 11 (black)

Fig. 14

3ft. audio cable

Fig. 15

Bluetooth module

4. Connect control/mic plug (See Fig . 16) Bluetooth Module "Mic" input

(See Fig. 15)

Fig. 16

Control button/Microphone

5. Consider where to install control/mic button. Keep in mind the control

button must be within reach of the driver and facing driver for voice

commands and phone dialog (cable is 6ft. long). We recommend

completing the rest of the install prior to securing the

control/mic button to the dash. Once you decide on a location simply

remove tape backing (See Fig. 17) and stick to dash (See Fig. 18)