Discount Car Stereo JAGCD-HF 빠른 시작 설치 매뉴얼 - 페이지 2

{카테고리_이름} Discount Car Stereo JAGCD-HF에 대한 빠른 시작 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Discount Car Stereo JAGCD-HF 12 페이지. Bluetooth kit for jaguar xk and xj with cd changer
Discount Car Stereo JAGCD-HF에 대해서도 마찬가지입니다: 설치 매뉴얼 (10 페이지)

페이지 인쇄

Introduction:

Safety comes first when you're on the road, so having an intuitive and easy to

use Bluetooth kit is essential to reducing driver distraction. The JAGCD-HF

Bluetooth receiver is compatible with virtually all smartphones, and sounds

great for mobile conversations or streaming music. In addition, the JAGCD-HF

requires and retains factory installed CD changer and also includes a USB

port to changer devices. The included audio adapter connects at the changer in

trunk/boot and module installs beneath center console glove box (armrest).

See Frequent Asked questions and Feature Comparison at the end of this

guide.

Audio module Installation:

Remove carpet trim piece surrounding audio rack

Remove (4) 8mm nuts securing rack to vehicle.

wiring and connections are behind the units

Locate CD changer single thick black cable (connects changer to

Amplifier in premium systems or radio in standard systems) (See

Fig. 1)

Noteworthy: There are a few cables with similar size/color in this area.

The single thick black cable from changer chassis is the correct one

Fig. 1

Remove cable from holding tab and disconnect them by gasping both

plugs and gently pulling apart

Once disconnected; CD changer female connector (right),

amplifier/radio plug (left) see Fig. 2

Fig. 2

Mate CD changer connector to audio module right angle male plug.

Note: Module right-angle plug (See Fig. 3) does not have an alignment

arrow indicator, however the imaginary arrow (See Fig. 3) must be

opposite arrow on factory changer connector. Once aligned mate both

(do not

twist).

Fig. 3a

(do not twist)

Fig. 3