Discount Car Stereo A2D-BKR 빠른 시작 매뉴얼 - 페이지 5
{카테고리_이름} Discount Car Stereo A2D-BKR에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Discount Car Stereo A2D-BKR 10 페이지. Music streaming module for becker radios with aux menu option
Discount Car Stereo A2D-BKR에 대해서도 마찬가지입니다: 빠른 시작 설치 매뉴얼 (9 페이지), 빠른 시작 설치 매뉴얼 (10 페이지)
페이지 인쇄Enabling AUX menu option
One important step in this process is to enable the AUX function within the
radio menu. Most Becker radios are pre-programmed to recognize the CD
changer connection and because of that you must perform the following steps
and change the setting to "AUX" otherwise the radio will not recognize this
module.
Radios with TP button: (i.e., CDR-220)
1.
Turn radio "ON"
2. Press and hold the "TP" (Traffic program) button for about 8 seconds
until Becker 1 is displayed.
3. Turn Tuning knob until AUX OFF is displayed.
4. Press button located directly under arrows on the display to change
present setting from OFF to ON.
Turn radio OFF.
5. Turn radio back ON, press the "S" (Source) button to enter AUX Mode.
This is the mode to use whenever you want to listen to device
connected to adapter.
Radios with ☼ button: (i.e., BE6104)
1.
Turn radio "ON"
2. Press and hold the ☼ button for about 8 seconds.
3. Select AUX "ON/OFF" option.
4. Press either button located directly under arrows on display to change
setting to ON.
5. Turn radio OFF.
6. Turn radio back ON press the "☼" button until "AUX" is displayed.
Other radios with ☼button (i.e., BE4602)
Turn radio ON.
1.
Press and hold the ☼ button for 8 seconds, until Becker 1 is displayed.
2.
Turn the Tuning Knob until AUX OFF is displayed.
3.
Press either button located directly under the Arrows on the display to
4.
change the present setting from OFF to ON
Turn radio back "ON" Press "CD" button to enter AUX Mode
5.
Radios with 3 Function buttons (i.e., BE4527)
Turn radio ON.
1.
Press and hold Function button #2 (center) for more than 4 seconds.
2.
The accompanying menu appears on the display.
3.
Press multifunction button located directly under "AUX" on the display
4.
to change present setting from OFF to ON.
Setting is stored automatically.
5.